Cox Remote Not Working [Fixed]

Cox Remote Not Working

The TV comes with Cox’s set top box, which allows you to stream videos, download apps, and watch cable. Some rCox Remote Not Working completely in rare cases, just as they do with other TV devices. To troubleshoot a Cox Remote Not Working, here are the steps you need to take.

Before using the Cox remote, you must pair it with your TV. Furthermore, you should check to see that the batteries are inserted correctly, that your TV has a clear line of sight, and that you are within the device’s range. You may need to replace your remote.

Also read: How to Turn on Roku TV Without Remote?

The following article will describe each step of the troubleshooting process. Our guide also explains what to do if your remote still does not work even after following all of the troubleshooting steps.

Cox Remote Not Working

Cox Remote Not WorkingAt the top of the Cox remote, a red light flashes when you press a button. There will be no light if the battery is flat or if the remote is malfunctioning. The next step is to replace the battery after it has been replaced.

Your Cox remote must be set to the TV button before you can operate it. Try restarting the device and making sure your TV and Cox device are in line of sight on the remote if you have already done so. Otherwise, you will need to replace the remote.

Troubleshooting your system can be done by following these steps:

1. Make sure the batteries are new and installed correctly

Cox Remote Not WorkingEven though you probably already did this, you must do it first since your remote will not operate without fully charged batteries. Open the back cover of your remote and make sure that the batteries are seated the right way around.

Replace the batteries with a new pair after ensuring they are completely drained. In case this step does not solve your problem, you can try the following steps. If you are having problems with your Cox remote, try the following steps to resolve the issue.

2. Make sure your Cox set-top box is paired with the remote control as well as your TV and receiver

Initially, you will need to pair your set-top box with your Cox remote in order to use it. As well as connecting it to your TV, you should also connect it to any home theater receiver you use. You can connect your remote to any of these devices with the help of this video from Cox:

3. Restart your Cox set-top box and TV

Because your TV or set-top box has an internal computer, you may have a problem with its code. The device restarts both of them when they are closed and reopened. It is necessary to remove your Cox device’s power cord. Be sure to reconnect it afterwards.

To start the computer after connecting, press the power button. Power on the television if it doesn’t turn on automatically. Unplug it or switch it off and reconnect it to the wall to start it working again. After you unplug your TV, it will automatically go into standby mode. Press the power button to turn it on.

4. Ensure that your TV and Cox device are in line-of-sight and range

Cox remotes can be controlled from any wireless device, so users do not need direct line of sight in order to use them. Infrared (IR) signals are used to operate some buttons. You must point the remote at the Cox device or television to press the buttons on the infrared remote.

A distance of 10 feet (3 meters) must also be maintained between you and the TV or Cox device. If anything is between your TV and Cox set-top box, the signal can be obstructed. Get rid of anything that may be blocking the signal.

Also read: time warner remote control codes and instructions

5. Order a replacement remote

Having tried all of the above steps, it is possible that the electrical components of your remote are malfunctioning. A new remote must be purchased, according to the official Cox website

Cox Remote Not Pairing

For your home theatre system to work properly, a Cox remote must be paired with Cox devices, TVs, and receivers. Here are the steps you should take if you are having trouble pairing.

You can find the unique code for your device on the official website of your TV or receiver. A pairing code is generated automatically when a Cox set top box is put into pairing mode. Even without the code, it can still be connected to the TV.

The pairing is explained in step 2 above. The remote must be connected to your TV, receiver, and set-top box. There are links in the article near the top with instructions explaining how to do that. Additionally, there are instructions below the video for those without a code.

Also read: How to Program GE Jasco Universal Remote Control

Cox Remote Won’t Turn On/Off TV

Cox Remote Not WorkingYou should be able to use your Cox remote on your TV and set top box after setting up your set top box. In case you haven’t set it up yet or are having trouble turning on or off your TV, here are the steps you need to take.

Before you can press the power button, you must set your Cox remote to the TV channel. When the TV button is not pressed first, the Cox set top box turns off. If it doesn’t work after pairing, you might need to pair your remote with your TV.

TVs are also turned on with infrared signals. To accommodate this, it should be within 10 feet (3 meters) of the television and have a clear line of sight. For those who are having trouble using their Cox remote, we’ve explained how to turn it on.

Your already completed steps can be skipped. Your Cox remote will not be able to turn on or off your TV until you go through all of them.

Cox Remote Not Working Because of various reasons, including drained batteries, improperly installed batteries, or not pairing the Cox remote with the television. There might also be a line of sight issue between the infrared sensor on the front of the device and the remote.

Related: Disconnecting Comcast Xfinity Remote from TV

Leave a Reply

Your email address will not be published. Required fields are marked *