LG remote not working- LG magic remotes and infrared remotes are used to control your TV if yours is not working. This can be done by a remote control with a Bluetooth module and an infrared transmitter. If it is your first time using the remote, you must pair it with the TV first. You may need to pair your remote control with the TV after replacing the batteries. If you turn off the power after using the remote, the remote should still remember the TV. Having the devices paired will continue to work even when they’re switched off. There is a problem with the connection protocol software in this situation, so the remote control and TV will not work properly.
Also read: How to Reset Vizio TV Without Remote
Table of Contents
how to fix LG magic remote not working
In the event that your LG remote not working, try the following solutions
- To restart your TV, unplug it for 20-30 seconds.
- The TV remote should be connected to the TV
The malfunctioning of a remote control does not necessarily mean it is defective. Televisions nowadays operate like computers. For the TV to work properly, you need to load a number of programs. For instance, certain features of the TV require certain programs. There is a program that decodes the remote control commands and activates the signal receivers in the TV. With Bluetooth, the TV can be controlled by moving the cursor across the screen or by sending voice commands. Upon removing the pairing (remote + TV), you may need to pair the devices again.
How to pair the remote control with your TV depends on its model (year). Here are some tips for pairing your remote control with your television.
Also read: How To Find a Music Video by Describing It
Pair LG remote to TV
You must turn on the TV.
There are a few conditions that must be met for the remote control to pair with the TV.
- The television must be turned on.
- It is best to turn off any nearby LG televisions if there are others nearby. There is a remote control for each TV.
- Upon turning on your television, it takes some time for the operating system to start up. It takes 20-30 seconds for pairing to begin.
- Ideally, the remote control must be paired with the TV next to a strong bluetooth signal, and the TV and the remote must be close to each other. In this way, the TV cannot be accidentally paired with another TV.
Pairing LVxxxx, LKxxxx series TVs with the Magic remote control for 2010-2011
A magic remote for televisions from 2010-2011. This is what the remote looks like for the LV and LK series. One of the first smart TV remote controls was the LV and LK series.
By holding the remote control at arm’s length and pressing OK or MUTE on the remote control, you can pair it for the first time.
A message will appear on the screen after the remote control has been paired with the TV. A blinking backlight will provide visual indication of the pairing process on the remote control.
Also read: Vizio TV Not Connecting to WiFi
Models and remote controls of TVs from 2012-2021, M, W, S, N, A, B, C, F, G, H, K, P series
The magic of remote control (2012-2021). LG TVs include these remote controls since 2012. Although the remote controls’ appearance has changed over time, the way they are paired with the TV has not.
When you turn on the remote control, insert the batteries, face the television (you should be near the screen), and press OK (the computer mouse wheel) to pair it with the television. When you hold down the OK button, a pairing message appears on the TV screen.
LG TV home button not working
Many people access their TV’s menu by pressing the Home button. The TV or remote control may malfunction, preventing you from using the Home button. In case your remote control’s batteries are dead, you may need to replace them. If the problem persists after replacing the batteries, try reconnecting the Magic Remote to the TV. Removing the pairing from the remote and pairing it again will restore the connection.
Also read: Samsung TV Won’t Connect To WiFi
How to reset LG TV remote
You need to reconnect or set up the remote control if it was previously paired with the TV. Before you can connect the remote, you will need to unpair it from the TV. Using the remote control, press HOME and back simultaneously. Press and hold the buttons for at least five seconds. You will then be able to reset the remote.
How to Re-pairing the remote control to the TV
Remote controls are paired in the same way as new ones. You can now control your TV with the Magic remote control in your hand. Pair the remote control with the TV when you see a message on the screen.
The pairing process must be repeated if it fails. The TV needs to be restarted and turned off and on again for the program cache to be cleaned and the service programs to be started.
LG TVs from 2016 feature a single button to connect and disconnect the remote control, making it convenient for users. To connect and disconnect, hold the GUIDE button for five seconds while pressing the remote control. The TV reconnects to itself after disconnecting the Magic remote (removing pairing). Use the remote control while completing all steps.
TV and Magic remote sync problems
You may experience this problem, where you unbind the remote and pair it again, but nothing happens. The remote is useless. In this case, the remote is likely to be defective. LG’s remote is a sophisticated device that is capable of both real-time control of the TV with the mouse and answering voice commands. It has Bluetooth, a gyroscope, and a gyro sensor. Due to the fact that it is a portable device, it has a three-month warranty. Some elements of the remote may malfunction due to the fact that it is often dropped. A new remote will need to be purchased if you cannot pair your Bluetooth TV remote with your TV. It is possible that the main board of the TV has a faulty bluetooth module.
Also read: How to Pair ONN Headphones with an Android or iPhone Quickly?
standard LG remote control not working
The remote control on your LG TV needs to be fixed if LG remote not working.
You should be able to use the standard remote control. The camera should be pointed at the infrared LED on the remote control. When the camera is aimed at the remote control, it can clearly be seen. If you press any of the buttons on the remote, you may see a flashing LED on the camera. Cameras detect the infrared electromagnetic waves emitted by remote controls, which are invisible to humans, but detectable by infrared light.
LEDs on remote controls that blink indicate that they are working. Televisions do not have infrared receivers. Make sure there is nothing blocking the signal reception. It is necessary to unplug TVs from the wall outlet for 1-2 minutes in order to reset them. The problem could be with the TV if you turn it on in 1-2 minutes and check the remote. Even after that, if the remote doesn’t work, it needs to be repaired.
Batteries should be replaced if the remote control is not blinking. If replacing the batteries does not resolve the problem, a new remote control will have to be purchased.
Also read: Why Does My Spectrum Cable Keeps Freezing?
Buttons on LG TV remote aren’t working
Usually, the buttons that are used most often on the remote control cause problems. The channel button, for instance, is prone to malfunctioning. There is contamination on the board, affecting the contact pads. An alcohol-based cleaner can be used to restore the functionality of a remote control. Usually, this procedure will restore functionality to most remote controls.
Using a remote control without a TV
When your remote control breaks, you can still control your TV from your phone using an app. If your LG TV is connected to Wi-Fi, you can use your phone to watch it. In order to use the TV control app, your phone and TV must be connected to the same network.
The LG TV Plus application for Android and Apple phones is available for both platforms. This app can still be used without a remote control if you don’t have one.
Also read: How do I reset my Harmony Hub to factory settings?
Final Thoughts of LG remote not working
There are a few tweaks that need to be done on LG Smart TV remote controls, but they do not need to be replaced. It is possible to repair a broken LG remote by replacing the batteries, using fresh batteries instead of the old ones, or checking the TV’s range and connection. A soft cloth is also the best way to clean it.
It doesn’t matter how old you are or how far you live, we’re here to help. We can assist you in case your DIY project does not go as planned or you need a remote to work. if you have questions about LG remote not working guide then comment below.
