Pyle Soundbar Remote Control Codes

Pyle Soundbar Remote Control Codes

Pyle soundbar remote control codes. Our Pyle Soundbar remote codes will let you control it using a universal remote, cable remote, or satellite remote. Following are instructions for setting up your Pyle sound bar to work with DISH, ATT U-Verse, and DIRECTV remotes. If you have the right programming guide and codes for the Pyle soundbar, any universal remote control can be used to control the soundbar.

Also read: Zenith TV Converter Box Remote Codes

Pyle Soundbar Remote Codes

Programming a Pyle Soundbar with your universal remote control is easy. Simply follow the codes below.

Pyle Soundbar 3 Digit Remote Control Code:


Pyle Soundbar 4 Digit Remote Control Codes:



Pyle Soundbar 5 Digit Remote Control Codes:






You can link a Pyle Soundbar with a Logitech Harmony One Universal Remote

Universal IR Remote Control with Touch Screen Control, Harmony Ultimate One from Logitech

The CAB or SAT remote may work if these remote codes do not work.

Pyle Sound Bar with Dish Remote

How to use the Pyle soundbar with a TV remote

DIRECTV Remote Control Pyle Code Search:

The Pyle Soundbar should be turned on

MUTED volume while volume is up

To switch between AV1 and AV2, press the appropriate key

Two blinks while holding MUTE and SELECT

Wait two blinks after entering 9 9 1

Please enter 3

Release of the press and release of the video

Press and release the CH UP key while pointing the remote at the soundbar

In order to lock in a code, press SELECT when the volume changes.

Comcast Remote Control Pyle Code Search:

Your Pyle Soundbar needs to be turned on in order to be programmed.

Your remote’s “Setup” button should be pressed and held for a moment. A green LED should appear.

By pressing the number buttons, type the above remote code.

As soon as you accept the code, the status LED will blink twice green. A red blink indicates a wrong entry.

Your Denon soundbar can be operated using the remote.

If the code you entered wasn’t accurate, try another code and repeat.

Here are some CODE SEARCH (Remote Control Programming) methods that should be able to be used with ANY universal remote but are written for Comcast and DIRECTV remotes. We will show you how to use your current remote control to control your Pyle soundbar using the methods above.

Depending on the Pyle soundbar, the TV IR code should be similar to the Pyle soundbar.

Pyle soundbars come with a manual.

This is the owner’s manual for Pyle soundbars…

Pyle Manuals and Downloads

You should be able to use these codes on Pyle soundbar models PSBV200BT, PSBVWF300B, and PSBV600BT.

Would you like more information about programming your CAB SAT or Universal remote to your Pyle soundbar? We would be happy to answer your questions as soon as possible.

Related: Magnavox TV Converter Box Remote Codes

Leave a Reply

Your email address will not be published. Required fields are marked *