RCA Soundbar Remote Control Codes

RCA Soundbar Remote Control Codes

RCA soundbar remote control codes. Our website has the remote codes that will allow you to control an RCA Sound Bar using a universal remote control, a TV remote control, a cable remote control, or a satellite remote control. With the correct programming guide and the specific remote codes for RCA soundbars, any universal remote control can be used to control an RCA soundbar. Our team will find the correct code if the codes below don’t work with your RCA sound bar. To find it, leave a comment below with the remote control model number and the model number of your RCA sound bar.

Also read: SONY Soundbar Remote Control Codes

A remote control for RCA soundbarsA remote control for RCA soundbars

You will need to program the remote to work with your RCA soundbar if you wish to use these remote codes. The following steps will show you how to program your remote to work with your RCA soundbar…

RCA Sound Bar can be controlled with your universal remote control.

The following 5 digit remote codes should be used.

RCA Soundbar 5 Digit Remote Control Codes:

Most likely to work:





Other RCA Soundbar 5 Digit Remote Control Codes to try:


























The remote codes provided below are for the RCA Soundbars RTS7010B, RTS7110B-2, RTS7131B, RTS7340SB, RTS736W, RTD3266, and RTS635 series.

Use the Comcast remote with the red OK/Select button to search for codes:

Switch on your RCA sound bar

Once you have pressed Aux

When the Setup key blinks twice, press and hold it

Setup for release

Please enter 9 9 1 3

Two blinks will appear on the Aux key

Turn on the RCA sound bar using the remote control and aim it at the power button

The RCA sound bar will turn off when you press CH+

If the remote control is used in code search mode to search the device’s IR codes, it will send the codes from its library.

Lock the code in by pressing Setup once

Two blinks will appear on the Aux key

For programming your Universal remote control, please find your brand and model by following the links below. You can also look for a YouTube video for the model number of your remote in the programming instructions included in the packaging.

The remote codes listed on this page can be used to program the remote to work with your RCA SOUNDBAR once you find the step-by-step instructions.

Programming a specific remote control: Including Satellite, Cable, TV, and Universal remotes – COX remotes, ONE FOR ALL remotes, DIRECTV remotes, CHUNGHOP remotes, JUMBO remotes, GT MATRIX remotes, Zenith remotes, Vizio remotes, RCA remotes, Comcast remotes, DISH remotes, Mitsubishi remotes, SONY remotes, Philips remotes, On-Q Home Systems remotes, GE remote

On the following pages you can find the most common universal remote codes for TVs: the 2 digit TV remote code, the 3 digit TV remote code, the 4 digit TV remote code, and the 5 digit TV remote code.

I would like you to share with us and all our readers the remote code that you found that works with your RCA SOUNDBAR using the comment box below. I really appreciate it!

Do you need further assistance configuring your Universal or CAB SAT remote to work with your RCA soundbar? We are available to assist you in the comments section.

Related: Sceptre Soundbar Remote Control Codes

Leave a Reply

Your email address will not be published. Required fields are marked *