In order to program the LG, Vizio, Sony, Insignia, Sanyo, Bose Solo, or Samsung soundbar remotes, you must enter the following codes. It has been verified that these codes work with Xfinity, Comcast, Verizon FiOS, DirecTV, Uverse, Time Warner, Brighthouse, and DISH, as well as the majority of generic universal remote controllers. NOTE: Use the “AUX” button on your remote to control the sound bar if you have trouble programming your remote to work with your Sound Bar.
Also read: TaoTronics Soundbar Remote Control Codes
PLEASE NOTE: If you cannot control your sound bar with a remote code, you should get a Harmony 350 universal remote to control all of your devices.
Harmony 350 Universal Remote Control – 8 in 1
Table of Contents
BOSE SOUNDBAR REMOTE CODES
Here are the codes you need to program your remote control to work with a BOSE Solo Sound Bar:
4001
5042
4017
1961
31629
31229
31841
30639
31253
30674
Uverse programming instructions:
(At the same time) press ATT/OK – 955 – Enter
Following the mode button, the volume control will appear.
Programs available through DirecTV:
Select AV1 or AV2
- The LED will flash twice as you hold down MUTE and SELECT
- Type in the four or five digit code above.
If the VOL UP doesn’t work after each code, try the VOL DOWN.
In that case, slide the switch to AV 1 or AV 2
- Tap SELECT (LED flashes twice) and MUTE at the same time.
- Press SELECT, then 993
NOTE: You need to make sure your Bose will accept IR codes.
(Confirmed: works with BOSE Solo Soundbar with SKY HD Rev9, DirecTV RC64, and Xfinity remotes)
INSIGNIA SOUNDBAR REMOTE CODES
These are the codes you need to program your remote control for INSIGNIA Sound Bars:
21268
12002
10463
Try Code Search if you are not able to use your Comcast remote or above codes:
Make sure your sound bar is on.
The Aux button on the remote should be pressed once.
You should then hold the Setup key until it blinks twice, and then release it.
Please enter 9 – 9 – 3.
Two times will be displayed on the Aux key.
You can turn the sound bar off by pressing the CH + button several times on the remote control while the sound bar is on and your remote is aimed at it.
Once the code has been locked in, press Setup again.
Two blinks will appear on the Aux key.
Repeat steps 1 to 5 for any other device you want to find codes for, substituting the mode key for the device you’re looking for.
SIDE NOTE: During search mode, the remote control first sends the most popular IR codes to the selected device from its library.
(Confirmed: works with INSIGNIA Soundbar NS-SBAR-A, NS-SB314, SB212, with Comcast remotes)
REMOTE CODES FOR THE SAMSUNG SOUNDBAR
The following codes can be programmed into your remote control for a Samsung Sound Bar:
32609
22609
21014
20045
(Confirmed: works with Samsung Soundbar HW-FM55C, FM550, HW-HM45 and Xfinity remotes)
REMOTE CODES FOR SONY SOUNDBAR
The following codes should be used to program your remote to the SONY Sound Bar:
1345
4029
31759
Use this method to program your Uverse remote:
Enter 955 by pressing both ATT and OK simultaneously.
The STB sound should be set to 15 in ATT mode.
TV volume should be set to a comfortable level
SONY soundbars can be set to a comfortable volume level.
(Confirmed: works with SONY Soundbar HTCT260, CT770, CT-660, HTCT660 and Uverse remotes)
LG SOUNDBAR REMOTE CODES
Use the following codes to program your remote control to an LG Sound Bar:
32676
11993
31953
31293
(Confirmed: works with LG Soundbar NB2022, NB3530A and Xfinity XR2 remote – Xfinity XR5 v4 remote)
VIZIO SOUNDBAR REMOTE CODES
To program your remote control to a VIZIO Sound Bar, use the following codes:
0883
0660
1517
1144
31517
11144
31975
Vizio Subwoofer volume control:
00105 Sub Down
00040 Sub Up
(Confirmed: works with VIZIO Soundbar VSB200, SB4020M-AO, SB15 2.1, VHT215, SB4021M-A1, VSB202, VSB210, VSB200-B)
The following steps will help you get your Vizio Soundbar to work with the Comcast remote using EFC codes:
Aux – Setup (2 blinks) – 11144 (2 blinks)
Aux – Setup (2 blinks) – 994 – Setup – 001690 – Vol Up – 2 blinks
Aux – Setup (2 blinks) – 994 – Setup – 001680 – Vol Down – 2 blinks
Aux – Setup (2 blinks) – 994 – Setup – 000370 – Mute – 2 blinks
Aux – Setup (2 blinks) – 994 – Setup – 001650 – Power – 2 blinks
Aux – Setup (2 blinks) – 994 – Setup – 001640 – Input – 2 blinks
You can control the sound bar’s volume by following the Unlock/Lock instructions with the 993 code for the Comcast remote.
Following the instructions, make sure the volume is unlocked with the 993 code.
You will then be able to adjust the volume using Comcast’s remote rather than the TV.
CODES FOR SANYO SOUNDBAR REMOTES
Use the following codes to program your remote control to your SANYO Sound Bar:
20047
10154
10159
10051
10250
If you want to connect your Sound Bar to Cable box, SAT box, or TV directly, you can do so. There may be different programming methods required for different sound bars.
You can program your TV or universal remote control by searching the links below and finding its brand and model. Additionally, you can search YouTube for a video for your specific model number remote or check the programming instructions included in your remote.
Using the remote codes included on this page, you can program the remote to work with your SOUNDBAR following the step-by-step instructions.
This guide addresses programming remote controls for the following: satellite, cable, and universal remotes – COX remotes, ONE FOR ALL remotes, DIRECTV remotes, CHUNGHOP remotes, JUMBO remotes, GT MATRIX remotes, Zenith remotes, Vizio remotes, RCA remotes, Comcast remotes, DISH remotes, Samsung remotes, Mitsubishi remotes, SONY remotes, Philips remotes, On-Q Home Systems remotes,
There are several versions of the most common TV universal remote codes for 2, 3, 4, and 5 digits. You can find them on the following pages: 2 digit TV remote codes, 3 digit TV remote codes, 4 digit TV remote codes, and 5 digit TV remote codes..
WE NEED YOUR HELP AND THAT OF ALL OUR READERS. If you’ve found a remote code that works with your SOUNDBAR, please use the comment form to tell us and all our readers which remote code worked. We’d appreciate it if you could share it!
Related: Denon Soundbar Remote Control Codes