Fixed: Samsung TV Won’t Connect To WiFi [Updated 2022[

Samsung TV Won’t Connect To WiFi

The easy connection to WiFi and the high-resolution screens of Samsung TVs are major selling points. Sometimes, however, the Samsung TV Won’t Connect To WiFi. We want to help you fix your experience so you don’t have a bad one.

Also read: How to Pair ONN Headphones with an Android or iPhone Quickly?

Why won’t my Samsung TV connect to the internet? How can I fix it? Approximately one minute after unplugging your TV from the wall, plug it back in. The TV should now be turned on and plugged back in. You should give each 5.0 GHz and 2.4 GHz wireless connection a unique name and change the connection type. Your phone’s IP settings can be used to set up your TV’s network settings. Power off and then on your TV:

  1. You should turn on the television.
  2. Holding the power button for a few seconds displays the Samsung logo.


  1. You should now be able to watch TV on your Samsung TV.
  2. After about five minutes of watching, remove the power cable from the television.
  3. After waiting 20 minutes, turn on the TV again.

There are several reasons why Samsung TVs have issues with their Wi-Fi connectivity. This article includes step-by-step instructions that will help you fix it.

Why does Samsung TV Won’t Connect To WiFi?

Samsung TV Won’t Connect To WiFiIt is possible for Samsung TV to have connectivity issues due to a number of reasons. Listed below are some of the most common ones:

Incompatible Firmware:  

In the past couple of months, TV firmware has probably not been updated. If the firmware isn’t updated, it won’t work properly. You may also have the wrong TV settings. You may also be at risk of a malfunction if the firmware is outdated.

Bugs in general: 

When the Samsung TV is turned off for a period longer than 10 to 15 minutes, its network settings are corrupted. A number of technical reasons may also make your device vulnerable to general bugs.

Address block for Mac: 

Samsung TVs connect to the router with specific addresses just like other devices. The device will not connect to the router if an ISP or user blocks an IP address. Samsung TVs may have trouble connecting to WiFi if this happens.

Configure DNS: 

An incorrect DNS setting may cause a conflict between your television and your router when you connect to Wi-Fi through your television. This Samsung TV Won’t Connect To WiFi problem can occur when users make a mistake when manually changing settings.

Modem or router issue:  

It is possible for your smart TV to be unable to connect to WiFi at any time if your WiFi router is malfunctioning.

Password incorrect: 

There are many people who type incorrect passwords. TV users often encounter this problem because of the on-screen keyboard’s difficulty.

Also read: Why Does My Spectrum Cable Keeps Freezing?

Why is my Samsung TV unable to connect to WiFi?

Samsung TV Won’t Connect To WiFiYou may be able to fix your Samsung TV after knowing the reasons why Samsung TV Won’t Connect To WiFi. There may be specific steps you need to follow depending on the cause of the problem. We’ll now take a look at how to resolve the WiFi problem on the Samsung TV by following just a few steps.

  1. Restart your Samsung TV

Most of the time, this is the easiest method. If your TV does not work normally for a while, you can use it to fix the problem. This can be done in two ways.

The first option is:

  1. Make sure the Samsung TV is turned on.
  2. There should be a Power button on the Samsung remote.
  3. When you keep pressing this button, you will see the Samsung logo on the screen.
  4. Red LEDs on the TV will begin to blink more rapidly after it has been restarted.
  5. Connect the TV to the WiFi network as soon as it is turned on.

If your TV still isn’t connected to WiFi, try the second option. Follow the steps below:

  1. On your Samsung TV, turn it on.
  2. Once the TV has been off for about 5-10 minutes, remove the power cable and turn it off with the remote.
  3. Approximately 30 minutes after turning off the TV, turn it back on.

If the problem continues, you must take the next step.

2. Unplug your TV

This solution has proven to be useful for many people. Despite its simplicity, it works. Plug your TV back into the wall after unplugging it for about a minute. Use the remote to turn it on. After the TV is reset, try connecting to the Internet again.

Also read: How do I reset my Harmony Hub to factory settings?

3. Use a wireless connection operating at 5.0 GHz

Your first step should be to rename your WiFi spot. It has worked previously for some people to solve this Samsung TV WiFi problem.

As soon as you turn on your TV, connect to the 5.0 GHz wireless connection, switch the 2.4 wireless connection to the 5.0 connection, and name both wireless connections different so that your TV does not think they are the same. Wireless connection 5.0 has fewer interferences.

If you were previously using a 5.0 GHz wireless connection, please use the 2.4 GHz one instead.

4. Use your phone’s IP settings

You can do so by following these steps:

  1. Turn on the TV.
  2. The Wi-Fi password must be entered within the Internet Configuration Menu.
  3. If the TV will not connect, you’ll have to change its network/IP settings.
  4. Under IP Settings, click Manual IP and DNS Configuration.
  5. Your smartphone connected to the same wireless network should display the same information.
  6. On your smartphone, go to Settings > Manage Network Settings > Show Advanced Options > IP Settings and choose “Static”.
  7. A screenshot can be taken of the network information that appears.
  8. This information needs to be entered in your TV’s Network Settings.
  9. Click OK to confirm.

5. Enter the IP address and DNS server information

You can set up your DNS server by following these steps:

  1. To check the status of the network, click Settings > General > Network.
  2. It is recommended that the network test be canceled.
  3. Click on IP Settings.
  4. From the DNS settings, select Enter Manually.
  5. Once you have entered, click Done.

Tip: If using the public DNS address doesn’t work, type manually instead.

6. Ensure your WiFi password is correct

It may be necessary to re-enter your WiFi password if the problem persists. Take the following steps:

  1. Start by pressing the Home button on your remote.
  2.  The network settings can be accessed by going to Settings > General > Network > Open Network Settings > Wireless.
  3.  You must enter the correct password for your wireless network. Verify that you entered the correct password by enabling Show password if you haven’t already done so.

It is possible that a problem persists despite a correct password because of a configuration or settings issue.

Tip: You may want to try changing your router’s WiFi password.

7. Make sure your network settings aren’t blocking your TV

You can reset the network settings of your TV by following these steps:

  1. The remote control has a Home button.
  2. The network settings can be found by selecting Settings > General > Network.
  3. By clicking the Reset button, the network will be reset.
  4. Select yes if it applies.
  5. By restarting the television, you can reset the network settings.

8. Disable Anynet+

When this feature is turned off on Samsung TV, it can cause a variety of issues, including issues with WiFi.

  1. A home button should be on your remote control.
  2. Select Settings > General from the menu.
  3. It will appear in External Device Manager.
  4. By pressing Enter on your remote control, you can turn on or off Anynet+ (HDMI-CEC).

9. Changing the time/date settings

You just need to change the time and date manually and see if that works. Make sure you uncheck Set automatically > in Settings > General > System Manager > Date and Time, you can manually set the time and date. If your TV sets these settings automatically, make sure you untick that box.

10. Install the latest software

There was a time when it could not connect to the WiFi, so couldn’t update its software over the internet. Updating the software solved the problem.

  1. Go to Settings and select Support.
  2. To update the software, select the Software Update option.
  3. By selecting it, you can enable Highlight Auto Update.

11. Check for strong signals

The following steps will help you determine whether your internet connection is stable or your TV loses connection:

  1. By clicking Settings > General > Network, you can access Network Settings > Wireless. 
  2. You need to make sure the bars are straight. If the signal is weak or fluctuates, the internet connection is too weak or unstable.
  3. Improve your WiFi signal by using a WiFi repeater if your router is behind many walls.

Also read: How To Setup Multiple Media Devices To A Television

12. Make use of Ethernet cables

Let’s use an Ethernet cable to ensure that your TV is directly connected to your router. The issue could be the router if it works, so it could be the router.

13. The network source should be restarted

Restarting the router or hotspot may resolve the problem when the problem comes from the router or hotspot.

  1. The WiFi router’s power cable must be unplugged.
  2. Approximately 10 minutes after turning off the device, turn it back on.
  3. Allow five minutes for the router to load the internet settings.
  4. By going to Settings > General > Network, you can access Network Settings > Wireless.
  5. Make sure you’re connected to WiFi.

14. Reset your Smart Hub

Resetting your Smart Hub could result in your Samsung TV Won’t Connect To WiFi issues and not being able to connect to the Internet. You can do this by following these steps:

  1. Home should be displayed on your remote control.
  2. Using Settings > Support > Device Care > Self Diagnosis, you can perform a self-diagnosis.
  3. By clicking Reset, you will reset the Smart Hub.
  4. PINs (default is 0000) should be entered for your TV.
  5. Observe the onscreen instructions.

15. Reset your television to factory settings

Samsung TV Won’t Connect To WiFiBy doing this, you can resolve software and settings configuration issues. Check your firmware before making this decision. If it is set to do this, your TV will automatically install the latest firmware version.

The steps below will help you reset your Samsung TV to its factory settings.

  1. The Settings > General menu can be accessed by clicking the gear icon.
  2. Your system needs to be reset.
  3. Start the process by entering your PIN. If you haven’t changed it before, 0000 is the default.

16. Replacing the WiFi module

Samsung televisions occasionally experience problems with their NAND-IC chip. Faulty WiFi modules are another potential source of problems. When you are willing to go the extra mile, it is possible to replace your WiFi module.

  1. Your TV must be powered off.
  2. Unscrew the back of your TV.
  3. It may be necessary to remove two covers from some TVs.
  4. Wireless modules are usually found under the plastic cover in the corner.
  5. A TV’s manual will tell you where the WiFi module is located.
  6. With a screwdriver, remove the WiFi module cable and the screw.
  7. The screw and replacement module should be used to attach the replacement module to the cable.
  8. A new back cover should be installed on the TV.
  9. You should update your TV’s firmware after replacing the WiFi module.

17. Consult a professional

When you’ve exhausted all other options, there’s nothing left to do but contact local electricians or Samsung Support to see if they can provide a viable solution for you.

18. Purchase a streamer

It may be an additional expense, but you would rather not have to deal with your WiFi problems. A streaming stick, such as the Amazon Firestick, Chromecast or Roku, can be had for a much lower price than buying new parts for your Samsung TV or buying a new TV altogether. Streaming sticks are generally considered more intelligent than smart TVs.

Also read: How To Fix SKSE64 Not Working?

Summing Up

If your Samsung TV Won’t Connect To WiFi, it will not connect to the Internet. There are several factors that affect the transmission of these signals, but this article includes the tips you need to fix it.

Leave a Reply

Your email address will not be published. Required fields are marked *