Samsung TV Won’t Turn On No Red Light [SOLVED]

Samsung TV Won’t Turn On No Red Light

Streamline your entertainment experience with Samsung TVs. With built-in apps and smart remotes, you can browse a variety of content and enjoy top-quality TV. You can fix all the issues you may be having with your Samsung Smart TV, such as forgetting to turn it on, seeing a white light instead of the red light, or stuttering or freezing while watching a movie, by following the guidelines below.

Also read: How to Reset Samsung tv Without Remote?

For users who have trouble turning on their Samsung TV or seeing any red light, we have a detailed solution in our guide. Various solutions are offered in response to users’ needs. Read the entire document to resolve the problem. Find the solution that works best for you.

Samsung TV Won’t Turn On No Red Light – Troubleshoot and Diagnosis

Samsung TV Won’t Turn On No Red LightSome problems are best understood by TV repairmen. The most common cause of TV issues is inadequate power, which makes up 99% of them.

 When your TV won’t power on, don’t worry about expensive and complicated repair plans. You can find a solution here.

If your television isn’t working, you must read this article! Nothing needs to be disassembled. Moreover, you won’t have to pay a lot of money for the repairs. Here are the steps you can follow to fix your TV yourself if you encounter a problem.

1. Try Pressing Random Buttons

If you are having trouble using your TV remote, try pressing random buttons. We have tested this method dozens of times, and it almost always works. An infrared signal can be sent from any button to your TV. To make the remote work, you need to press a bunch of buttons. Most of the time, this will fix the problem. Try pressing the buttons in a different order or at a different time if they need to be pressed at a certain time.

If the TV shows that it is turned on but the screen is blank, try using the buttons on the TV or remote control to fix the problem. You can also reset the TV remote by pressing the same button multiple times.

When a screen displays channel names or numbers but no incoming signal despite being plugged into its appropriate cable, that is a bad sign. In this case, the TV will need to be repaired by a technician – and it may be costly. You should consult an expert if you wish to prevent permanent damage.

Also read: My Samsung TV Keeps Turning Off Every 5 Seconds

2. Use a Different Power Outlet

Samsung TV won’t turn on issue could be caused by an electrical outlet that isn’t working. This could cause a variety of problems, ranging from temporary faults to permanent damage, such as blown fuses. Therefore, the power supply should be inspected before we proceed.

You can use the following test to find out if your TV is experiencing problems because of the power outlet. After unplugging the TV cord, wait one minute before plugging it in again. After moving the TV to another outlet, see if it now turns on.

In the event that the outlets work but the charger does not, you might also try plugging the charger into another “good” outlet. If the problem still persists, it is best to contact a professional electrician.

There is also a problem with cords and power supplies. You can disconnect it from the surge protector and plug it into two separate outlets instead.

3. Broken Power Cables

There is most likely a problem with the power cable causing the TV screen to be blank. The power cable should be connected securely in the wall outlet. To determine whether any outlets are damaged, turn on and off several in the same area.

Wear and tear are common problems with TV power cords. Although power surges are constantly present, they can still be damaged. If the cable becomes frayed along its length, it must be replaced. You should purchase a cable that is rated for the maximum amp your TV can handle. This seems like a no-brainer to me.

Dogs enjoy chewing on cables. If you have cables around the house, keep them out of reach of pets and children. Don’t let them get caught up in tangles when they are charging.

Keeping your power cords straight and organized will extend their life.

If you notice a minor bend in the cable, pull it out slowly and it will stop fraying sooner.

4. Try Resetting Samsung Smart TV

Samsung TV Won’t Turn On No Red LightIt’s possible that the power light is off and the TV cannot be turned on, so please try resetting it. A simple restart may be all that is needed to resolve minor issues. Resetting your TV requires you to turn it off for a few minutes, which resets its settings. After turning the TV back on, the power light should illuminate on the side, indicating that it is on.

Here’s how you reset a Samsung TV:

  1. Turn off the power source of the TV. It is possible to unplug the power cord from the outlet or remove it from the wall socket.
  2. Wait at least 30 seconds before reinstalling the power cable.
  3. Hold down the “Power” button on your remote control while you see “Samsung Electronics” on your television screen.

5. Blown Fuse

When the TV turns on, it should be able to turn on, indicating that the power board is functioning properly. It may also be a blown fuse or relay connected to the power board. Those familiar with electronic repair can perform the repair themselves. The cost of hiring an electrician may be higher than buying a new TV, though – unless you have an electrician on hand.

Having problems with your TV may be due to a failed relay near the power supply. You can probably fix this issue if you can access the backside of the TV. When you take off the back panel of your TV, you’ll typically find a small black box – usually the power brick – in the center of it. You can examine that. It is unlikely that the average person can repair a TV. Depending on whether some wires need to be soldered or a relay needs to be reconnected, the device may not turn on.

Also read: Samsung 6 Series vs 7 Series

6. Disconnect All Devices

Samsung TV Won’t Turn On No Red LightIf your TV is connected to multiple devices, such as a gaming console, an Apple TV, or a Chromecast, simply turning it on won’t work. In the event that these devices are turned on first, you might not be able to turn on your TV.

You may find that removing your device from the equation is an easy and reliable solution if it is not working. If this theory is correct, you may want to disconnect any Bluetooth devices or other electronic devices from close proximity to your TV for a few minutes. The issue may be fixed at that point. Does the issue persist after you remove everything from the vicinity? Try connecting your device to see if it still persists.

7. IR Window is Blocked

Here is a possible problem: the IR window on your television might be blocked. The remote might not work because of this. Check this from different angles.

If your remote control is malfunctioning, it may need to be replaced with a new one or a new battery. You might be able to restore functionality by replacing the batteries before buying an entirely new remote.

8. Low Voltage Problem

Check your TV’s voltage requirements first. As stated in the manual, it typically runs on 110V or 220V. Verify that your home is not experiencing problems with a lower voltage. An incorrect voltage usually causes this.

Don’t waste your time. Contact Samsung TV technical support for help. So you can spend more time doing what you love, you can now leave it to the professionals.

Also read: How to access the Samsung Smart TV service menu?

Leave a Reply

Your email address will not be published. Required fields are marked *