Samsung BN59-00599A Remote Instruction Manuals and Codes.

Samsung BN59-00599A Remote Instruction





With the Samsung BN59-00599A full-function or Universal remote control, you can operate a wide variety of devices and you can program the remote control to operate most of the popular brands of audio/video equipment like a TV, a DVD player (or VCR), or a Network satellite receiver. There may be features on this remote control that are not used by your receiver. Please refer to the documentation for your receiver. Setup and using your remote control has never been easier with this handy guide. This guide contains in-depth information so you can make the most of your remote control, including controlling other equipment like TVs, VCRs, and DVD players.

Looking for remote codes ge universal remote codes for samsung tv

If you press the power button next to the device and the device shuts off, then the device is already programmed and no further programming is necessary. You may need to replace the batteries in the remote if the device is not responding.

How to program Samsung TV to use universal remote code:

  1. Make sure that the DTA is properly installed and powered on.
  2. The front of the Adapter must be visible to your remote during setup.
  3. When the LED on the remote turns on, press and hold the PROG button and then press the INFO button to access your Adapter’s settings.
  4. As soon as the remote is in pairing mode, the LED on the remote will blink slowly.
  5. Your remote control will display a 3-digit number. Enter the number with the keys on the remote.
  6. Your TV will display Success if you enter the numbers correctly.
  7. You will see the message Sorry, the entry was incorrect if the numbers are not entered correctly.
  8. Enter the code displayed again to try again.

Second Method:

  1. During a few seconds, hold down the “PROG” button.
  2. A solid red light will appear.
  3. Once the “PROG” button has been released, press the “TV” key one time, don’t hold.
  4. You can try the Samsung 4 digit and 5 digit remote code list below. Enter the Samsung TV code : 0101, and keep trying.
  5. Once the correct code is entered, the LED light will go out.

Samsung 4 digit remote control codes:

0019, 0618, 0644 , 0056

0060, 0587 , 0037, 0178

0030, 0556, 0009, 0702

0774, 0093, 0217, 0448 

0747, 0482, 0370,






Remore Codes Samsung TV using Philips Remote:

0112, 0309, 0209, 0512, 0302, 0502, 0002,

0102, 0110, 0818, 0895, 0437, 0802, 0103, 0609, 0012, 0212

Remore Codes Samsung TV using One-For-All Universal Remote:

0587, 0178, 0093, 0060, 0030, 0019, 0056

Remore Codes Samsung TV using  GE Universal Remote

0105, 007,7 0076, 0109, 0007, 0009, 0004,

0005, 0085, 0172, 0942, 0358, 0012, 0015, 0080, 0104, 0106

Remore Codes Samsung TV using  RCA Universal Remote

Samsung TV 4 digit codes: 1004, 1009, 1012, 1013, 1014, 1015, 1025, 1046, 1056,

1065, 1069, 1078, 1083, 1102, 1103, 1104, 1123, 1124, 1194, 1205, 1207

Samsung TV 5 digit codes: 10812, 10054, 10060, 10702, 10178, 10030, 10056, 10650, 10766, 10814, 11060

Remore Codes Samsung TV using  Innovage Jumbo Remote Samsung codes:

004, 005, 009, 015, 104, 105,106, 109, 172

Remore Codes Samsung TV using  Samsung IR Codes

0051, 0161, 0181, 0261, 0301, 1181, 1561,

1661, 2141, 2391, 2401, 2551, 2791, 3211,

3601, 3661, 3711, 3721, 3741, 3751, 3761,

3771, 3781, 3791, 3811, 3821, 3831, 3861,

3881, 3911, 3921, 4091, 4101, 4111, 4121,

4831, 4841, 5191, 5201 (3211 work for Plasma and Led TV)

Setting the remote control to the correct mode for the equipment will require you to use the mode buttons. The remote control should be programmed to operate the other equipment as specified in the manual. The equipment you want to control can be changed by pressing the button for that item. After you set a remote to a specific mode, the mode button lights up for three seconds. 

You can control the receiver using UHF radio signals, infrared signals, or both depending on how the remote is set up. Other equipment is controlled by IR signals only. A single IR signal can travel up to 40 feet. It cannot penetrate walls or other solid objects because it travels at a short distance, generally 20 feet or 7 meters. Make sure there are no objects blocking the signal path between the remote control and the equipment you want to control.

You can program your remote control for your TV by following the instructions in this manual. In the following section, we will examine a different way to program a remote control to operate computer equipment (for example, a computer, DVD player, CD player, tuner, amplifier, audio receiver or a second TV). Following either the instructions in Programming Using Equipment Remote Code Tables or Scanning for Equipment Codes is another option for programming the remote control.

Program the remote control in one mode, and then repeat the procedure for the other mode if the remote control is operating combination equipment, such as a TV/DVD or TV/VCR. Using code 765, for example, is a simple way to program a remote to operate a TV/DVD player. The instructions for programming the remote to control the TV are the same as for the DVD. You can use the TV functions of the remote control as well as the DVD player (or VCR) functions by putting the remote control in TV mode.

Remote manual with instructing and Codes: 

Related: Remote Control Codes For JVC TVs

Leave a Reply

Your email address will not be published. Required fields are marked *