Looking for ADB remote programming codes or TV remote codes? There are several TVs that can be controlled by your ADB remote control. Below are instructions for programming and understanding your remote control. We’ve put together this page to provide you with all the remote control codes you’ll need for your ADB STB.
Also read: Remote Control Codes For Sansui TVs
Setup Remote Control For ADB – TV Remote Codes
Using existing codes:
- Turn on the TV
- Search for code
- Click on the TV device
- Hold the shift key down – the screen will blink twice
- Blink twice when entering the code
- Verify by pressing power
- Examine
Search Method:
- Turn on the television
- Press the button on the TV device
- Hold down shift and the screen will blink twice
- Blink twice when you press 991
- To turn off the TV, repeatedly press “program +”. To reverse, press “program -“.
- Click the shift button to store
- Testing
Blink out code: (Find out what the TV setup code is)
- Tap the TV key once
- Press shift and the light will blink twice
- The 990 press
- press 1 – count blinks –no blinks is 0
- Press 2 – count blinks –no blinks is 0
- Press 3 – count blinks –no blinks is 0
- Press 4 – count blinks –no blinks is 0
- You should now have your 4-digit code
Volumes punch through:
- Hold down the STB key
- Press and hold shift – it will blink twice
- Press the 993 button
- Blink twice when you press the TV key
- Testing
Cancel volume punch through:
- Press and hold shift – the light will blink twice
- Press 995
- Blink the light four times while pressing volume +
Master reset:
- Press and hold shift – the light will blink twice
- Press 977
- Light blinks twice
Real Time Macro: (to assign all off/on functions to PWR button)
- Press Shift
- Press 995
- To assign (PWR), press the key.
- (STB-PWR) and (TV-PWR) are the commands to program the STB
- Press Shift
To Clear Macro:
- Press Shift
- Press 995
- Press the key assigned (PWR)
- Press Shift
Default Password: 0 (zero)
Real Time Macro – One Button Programming
The ADB Set-top Box remote control can be programmed to issue a sequence of commands when a button is pressed.
It may be a good idea to turn off your TV, DVD, and set top box simultaneously.
In order to make your life more convenient, you can reduce any sequence you regularly use to a single keystroke.
If a macro key has been programmed, it can be accessed through all modes (provided it is accessible through that mode of operation).
Except for the Mode keys and the SHIFT key, you can install macros on any key.
To set up a Macro:
In the order given, follow these three steps.
Make sure you have your TV code ready.
You can find this code on our list of TV brand codes if you cannot find it in your TV’s manual.
- To program the remote to your TV:
The Press TV channel.
Then hold SHIFT until it flashes twice.
Please enter the 4 digit code.
Power up by pressing the power button. Your TV will be programmed if it goes off. If the TV does not turn off after following these steps, try a different code.
- When you are using the Set Top Box (STB) mode, you can adjust the volume of the TV as follows:
The STB button must be pressed.
STB will flash twice if you hold SHIFT.
–
Dial 993
The Press TV network.
You can try it by pressing STB and then volume up or down.
- From the STB mode, you can control the power of your TV:
The STB should be pushed.
When STB flashes twice, hold shift.
By pressing 995,
The Press Power,
The Press TV,
The Press Power,
The STB button must be pressed.
The Press Power,
The STB should flash twice after pressing and holding shift.
The following image and text format will help you to program your remote control to a TV. Find the manufacturer of your equipment on this list of remote control programming codes.
Table of Contents
Most Common Television Codes
Dell TV Remote Codes
1080, 1178, 1264, 1403
Emerson TV Remote Codes
0097, 0151, 0173, 0227, 0279, 0409, 0413, 0797, 1960, 0154, 0236, 0463, 0180, 0178, 0171, 1963, 1944, 0623, 0282, 0280, 0270, 0185, 0183, 0182, 0181, 0179, 0177, 0158, 0039, 0038, 0019Hitachi –1145, 0145, 0016, 0032, 0038, 0056, 0095
HP TV Remote Codes
1088, 1089, 1101, 1494, 1502
iLo TV Remote Codes
1286, 1603, 1990
JVC TV Remote Codes
0053, 0036, 0069, 0160, 0169, 0182, 0731, 1253
LG TV Remote Codes
1256, 0178, 0442, 0700, 0829, 0856, 1178, 1325, 1423, 1758, 1993
Magnavox TV Remote Codes
1454, 0054, 0030, 0706, 1963, 1944, 1525, 1254, 1198, 0802, 0386, 0230, 0187, 0186, 0179, 0096, 0036, 0028, 0024, 0020
Mitsubishi TV Remote Codes
0093, 1250, 0150, 0178, 0014, 0019, 0098, 0155, 0331, 0358, 0836, 0868, 1550
Optimus TV Remote Codes
0154, 0250, 0166, 0650
Panasonic TV Remote Codes
0250, 0051, 0055, 0162, 0226, 0338, 0375, 0650, 1291, 1410, 1941, 1946, 1947
Phillips TV Remote Codes
1454, 0054, 0690, 1154, 1483
Polaroid TV Remote Codes
0765, 0865, 1262, 1276, 1314, 1316, 1326, 1327, 1328, 1341, 1498, 1523, 1991, 1992
Also get : Remote Control Codes For Konka TVs
RCA TV Remote Codes
1447, 0047, 2002, 1958, 1953, 1948, 1547,1347, 1247, 1147, 1047, 0747, 0679, 0278, 0174, 0135, 0090, 0038, 0029, 0019, 0018
Samsung TV Remote Codes
0060, 0812, 0702, 0178, 0030, 1903, 1575, 1395, 1312, 1060, 0814, 0766, 0427, 0408, 0329, 0056, 0032, 0019
Sanyo TV Remote Codes
0154, 0088, 0107, 0146, 0159, 0232, 0484, 0799, 0893, 1142
Sceptre TV Remote Codes
0878, 1217, 1360, 1599
Sharp TV Remote Codes
0093, 0039, 0153, 0157, 0165, 0220, 0281, 0386, 0398, 0491, 0688, 0689, 0818, 0851, 1602
Sony TV Remote Codes
1100, 0000, 0011, 0080, 0111, 0273, 0353, 0810, 0834, 1317
Sylvania TV Remote Codes
0054, 0030, 0171, 0020, 0028, 0065, 0096, 0381, 1271, 1944, 1963
Toshiba TV Remote Codes
0154, 1256, 0156, 1265, 0060, 1945, 1935, 1704, 1656, 1635, 1356, 1343, 1325, 1306, 1156, 0845, 0832, 0650, 0149, 0036
Vizio TV Remote Codes
0864, 0885, 1499, 1756, 1758
Zenith TV Remote Codes
0017, 0463, 1265, 0178, 0092, 0016
Full list of ADB TV remote codes 1
Click image for full size!
Full list of ADB TV remote codes 2
Click image for full size!
You turn your TV on and off using your STB and TV. You should not use the DVD right now.
AV switches the inputs on your TV (video 1, video 2, etc.).
Only programmers should use SHIFT and SETUP.
When you press the POWER button, the selected component of your home entertainment system will turn on or off.
Select channels directly with the NUMBER KEY PAD (0-9).
TV sound will be turned off using the MUTE button.
Currently, our system does not support the TV.
Our system currently does not support the VIRTUAL KEYBOARD.
Closed captioning can be turned on and off with CC. There is, however, some variation depending on the television, channel, and programming. TXT may also be labeled on some remotes.
To increase (or decrease) the volume, use VOL+ (or VOL-).
The next highest (or lowest) channel is selected with PROG + or –. Using these buttons will allow you to navigate up and down the channel list.
The program guide can be viewed by using GUIDE. The button may be labelled ACTION on some remote controls.
You can display the settings menu by pressing the orange MENU button once.
Information about current channels and programs can be displayed using INFO.
Press a second time to see more channel detail and the next program.
Use ARROW KEYS (right, left, up and down) to move the cursor in the program guide and menu screens.
Once you have entered channel numbers, click OK. If the channel number is entered but the enter button isn’t pressed, some TVs will change.
Additionally, you can use the OK key to select options from the program guide and to tune a program.
The BACK button allows you to go one screen back in the main menu and to recall the last channel. The BACK button lets you alternate between the last two channels viewed by pushing it repeatedly.
The EXIT button can be used in the menu and guide, or whenever you wish to exit a particular function.
Our system does not currently use the RED, GREEN, YELLOW & BLUE buttons.
The PVR (Personal Video Recorder) has the following buttons to control its functions: REWIND, PLAY, PAUSE, FAST FORWARD, and STOP.
It is advisable not to press the TV remote as it may change its settings.
Setup ADB STB Remote Control With TV Remotes Codes
Looking for ADB remote programming codes or TV remote codes? There are several TVs that can be controlled by your ADB remote control. Below are instructions for programming and understanding your remote control. We’ve put together this page to provide you with all the remote control codes you’ll need for your ADB STB.
Setup Remote Control For ADB – TV Remote Codes
Using existing codes:
- Turn on the TV
- Search for code
- Click on the TV device
- Hold the shift key down – the screen will blink twice
- Blink twice when entering the code
- Verify by pressing power
- Examine
Search Method:
- Turn on the television
- Press the button on the TV device
- Hold down shift and the screen will blink twice
- Blink twice when you press 991
- To turn off the TV, repeatedly press “program +”. To reverse, press “program -“.
- Click the shift button to store
- Testing
Blink out code: (Find out what the TV setup code is)
- Tap the TV key once
- Press shift and the light will blink twice
- The 990 press
- press 1 – count blinks –no blinks is 0
- Press 2 – count blinks –no blinks is 0
- Press 3 – count blinks –no blinks is 0
- Press 4 – count blinks –no blinks is 0
- You should now have your 4-digit code
Volumes punch through:
- Hold down the STB key
- Press and hold shift – it will blink twice
- Press the 993 button
- Blink twice when you press the TV key
- Testing
Cancel volume punch through:
- Press and hold shift – the light will blink twice
- Press 995
- Blink the light four times while pressing volume +
Master reset:
- Press and hold shift – the light will blink twice
- Press 977
- Light blinks twice
Real Time Macro: (to assign all off/on functions to PWR button)
- Press Shift
- Press 995
- To assign (PWR), press the key.
- (STB-PWR) and (TV-PWR) are the commands to program the STB
- Press Shift
To Clear Macro:
- Press Shift
- Press 995
- Press the key assigned (PWR)
- Press Shift
Default Password: 0 (zero)
Real Time Macro – One Button Programming
The ADB Set-top Box remote control can be programmed to issue a sequence of commands when a button is pressed.
It may be a good idea to turn off your TV, DVD, and set top box simultaneously.
In order to make your life more convenient, you can reduce any sequence you regularly use to a single keystroke.
If a macro key has been programmed, it can be accessed through all modes (provided it is accessible through that mode of operation).
Except for the Mode keys and the SHIFT key, you can install macros on any key.
To set up a Macro:
In the order given, follow these three steps.
Make sure you have your TV code ready.
You can find this code on our list of TV brand codes if you cannot find it in your TV’s manual.
- To program the remote to your TV:
The Press TV channel.
Then hold SHIFT until it flashes twice.
Please enter the 4 digit code.
Power up by pressing the power button. Your TV will be programmed if it goes off. If the TV does not turn off after following these steps, try a different code.
- When you are using the Set Top Box (STB) mode, you can adjust the volume of the TV as follows:
The STB button must be pressed.
STB will flash twice if you hold SHIFT.
–
Dial 993
The Press TV network.
You can try it by pressing STB and then volume up or down.
- From the STB mode, you can control the power of your TV:
The STB should be pushed.
When STB flashes twice, hold shift.
By pressing 995,
The Press Power,
The Press TV,
The Press Power,
The STB button must be pressed.
The Press Power,
The STB should flash twice after pressing and holding shift.
The following image and text format will help you to program your remote control to a TV. Find the manufacturer of your equipment on this list of remote control programming codes.
Most Common Television Codes
Dell TV Remote Codes
1080, 1178, 1264, 1403
Emerson TV Remote Codes
0097, 0151, 0173, 0227, 0279, 0409, 0413, 0797, 1960, 0154, 0236, 0463, 0180, 0178, 0171, 1963, 1944, 0623, 0282, 0280, 0270, 0185, 0183, 0182, 0181, 0179, 0177, 0158, 0039, 0038, 0019Hitachi –1145, 0145, 0016, 0032, 0038, 0056, 0095
HP TV Remote Codes
1088, 1089, 1101, 1494, 1502
iLo TV Remote Codes
1286, 1603, 1990
JVC TV Remote Codes
0053, 0036, 0069, 0160, 0169, 0182, 0731, 1253
LG TV Remote Codes
1256, 0178, 0442, 0700, 0829, 0856, 1178, 1325, 1423, 1758, 1993
Magnavox TV Remote Codes
1454, 0054, 0030, 0706, 1963, 1944, 1525, 1254, 1198, 0802, 0386, 0230, 0187, 0186, 0179, 0096, 0036, 0028, 0024, 0020
Mitsubishi TV Remote Codes
0093, 1250, 0150, 0178, 0014, 0019, 0098, 0155, 0331, 0358, 0836, 0868, 1550
Optimus TV Remote Codes
0154, 0250, 0166, 0650
Panasonic TV Remote Codes
0250, 0051, 0055, 0162, 0226, 0338, 0375, 0650, 1291, 1410, 1941, 1946, 1947
Phillips TV Remote Codes
1454, 0054, 0690, 1154, 1483
Polaroid TV Remote Codes
0765, 0865, 1262, 1276, 1314, 1316, 1326, 1327, 1328, 1341, 1498, 1523, 1991, 1992
RCA TV Remote Codes
1447, 0047, 2002, 1958, 1953, 1948, 1547,1347, 1247, 1147, 1047, 0747, 0679, 0278, 0174, 0135, 0090, 0038, 0029, 0019, 0018
Samsung TV Remote Codes
0060, 0812, 0702, 0178, 0030, 1903, 1575, 1395, 1312, 1060, 0814, 0766, 0427, 0408, 0329, 0056, 0032, 0019
Sanyo TV Remote Codes
0154, 0088, 0107, 0146, 0159, 0232, 0484, 0799, 0893, 1142
Sceptre TV Remote Codes
0878, 1217, 1360, 1599
Sharp TV Remote Codes
0093, 0039, 0153, 0157, 0165, 0220, 0281, 0386, 0398, 0491, 0688, 0689, 0818, 0851, 1602
Sony TV Remote Codes
1100, 0000, 0011, 0080, 0111, 0273, 0353, 0810, 0834, 1317
Sylvania TV Remote Codes
0054, 0030, 0171, 0020, 0028, 0065, 0096, 0381, 1271, 1944, 1963
Toshiba TV Remote Codes
0154, 1256, 0156, 1265, 0060, 1945, 1935, 1704, 1656, 1635, 1356, 1343, 1325, 1306, 1156, 0845, 0832, 0650, 0149, 0036
Vizio TV Remote Codes
0864, 0885, 1499, 1756, 1758
Zenith TV Remote Codes
0017, 0463, 1265, 0178, 0092, 0016
Full list of ADB TV remote codes 1
Click image for full size!
Full list of ADB TV remote codes 2
Click image for full size!
You turn your TV on and off using your STB and TV. You should not use the DVD right now.
AV switches the inputs on your TV (video 1, video 2, etc.).
Only programmers should use SHIFT and SETUP.
When you press the POWER button, the selected component of your home entertainment system will turn on or off.
Select channels directly with the NUMBER KEY PAD (0-9).
TV sound will be turned off using the MUTE button.
Currently, our system does not support the TV.
Our system currently does not support the VIRTUAL KEYBOARD.
Closed captioning can be turned on and off with CC. There is, however, some variation depending on the television, channel, and programming. TXT may also be labeled on some remotes.
To increase (or decrease) the volume, use VOL+ (or VOL-).
The next highest (or lowest) channel is selected with PROG + or –. Using these buttons will allow you to navigate up and down the channel list.
The program guide can be viewed by using GUIDE. The button may be labelled ACTION on some remote controls.
You can display the settings menu by pressing the orange MENU button once.
Information about current channels and programs can be displayed using INFO.
Press a second time to see more channel detail and the next program.
Use ARROW KEYS (right, left, up and down) to move the cursor in the program guide and menu screens.
Once you have entered channel numbers, click OK. If the channel number is entered but the enter button isn’t pressed, some TVs will change.
Additionally, you can use the OK key to select options from the program guide and to tune a program.
The BACK button allows you to go one screen back in the main menu and to recall the last channel. The BACK button lets you alternate between the last two channels viewed by pushing it repeatedly.
The EXIT button can be used in the menu and guide, or whenever you wish to exit a particular function.
Our system does not currently use the RED, GREEN, YELLOW & BLUE buttons.
The PVR (Personal Video Recorder) has the following buttons to control its functions: REWIND, PLAY, PAUSE, FAST FORWARD, and STOP.
It is advisable not to press the TV remote as it may change its settings.
Setup ADB STB Remote Control With TV Remotes Codes
Looking for ADB remote programming codes or TV remote codes? There are several TVs that can be controlled by your ADB remote control. Below are instructions for programming and understanding your remote control. We’ve put together this page to provide you with all the remote control codes you’ll need for your ADB STB.
Setup Remote Control For ADB – TV Remote Codes
Using existing codes:
- Turn on the TV
- Search for code
- Click on the TV device
- Hold the shift key down – the screen will blink twice
- Blink twice when entering the code
- Verify by pressing power
- Examine
Search Method:
- Turn on the television
- Press the button on the TV device
- Hold down shift and the screen will blink twice
- Blink twice when you press 991
- To turn off the TV, repeatedly press “program +”. To reverse, press “program -“.
- Click the shift button to store
- Testing
Blink out code: (Find out what the TV setup code is)
- Tap the TV key once
- Press shift and the light will blink twice
- The 990 press
- press 1 – count blinks –no blinks is 0
- Press 2 – count blinks –no blinks is 0
- Press 3 – count blinks –no blinks is 0
- Press 4 – count blinks –no blinks is 0
- You should now have your 4-digit code
Volumes punch through:
- Hold down the STB key
- Press and hold shift – it will blink twice
- Press the 993 button
- Blink twice when you press the TV key
- Testing
Cancel volume punch through:
- Press and hold shift – the light will blink twice
- Press 995
- Blink the light four times while pressing volume +
Master reset:
- Press and hold shift – the light will blink twice
- Press 977
- Light blinks twice
Real Time Macro: (to assign all off/on functions to PWR button)
- Press Shift
- Press 995
- To assign (PWR), press the key.
- (STB-PWR) and (TV-PWR) are the commands to program the STB
- Press Shift
To Clear Macro:
- Press Shift
- Press 995
- Press the key assigned (PWR)
- Press Shift
Default Password: 0 (zero)
Real Time Macro – One Button Programming
The ADB Set-top Box remote control can be programmed to issue a sequence of commands when a button is pressed.
It may be a good idea to turn off your TV, DVD, and set top box simultaneously.
In order to make your life more convenient, you can reduce any sequence you regularly use to a single keystroke.
If a macro key has been programmed, it can be accessed through all modes (provided it is accessible through that mode of operation).
Except for the Mode keys and the SHIFT key, you can install macros on any key.
To set up a Macro:
In the order given, follow these three steps.
Make sure you have your TV code ready.
You can find this code on our list of TV brand codes if you cannot find it in your TV’s manual.
- To program the remote to your TV:
The Press TV channel.
Then hold SHIFT until it flashes twice.
Please enter the 4 digit code.
Power up by pressing the power button. Your TV will be programmed if it goes off. If the TV does not turn off after following these steps, try a different code.
- When you are using the Set Top Box (STB) mode, you can adjust the volume of the TV as follows:
The STB button must be pressed.
STB will flash twice if you hold SHIFT.
–
Dial 993
The Press TV network.
You can try it by pressing STB and then volume up or down.
- From the STB mode, you can control the power of your TV:
The STB should be pushed.
When STB flashes twice, hold shift.
By pressing 995,
The Press Power,
The Press TV,
The Press Power,
The STB button must be pressed.
The Press Power,
The STB should flash twice after pressing and holding shift.
The following image and text format will help you to program your remote control to a TV. Find the manufacturer of your equipment on this list of remote control programming codes.
Most Common Television Codes
Dell TV Remote Codes
1080, 1178, 1264, 1403
Emerson TV Remote Codes
0097, 0151, 0173, 0227, 0279, 0409, 0413, 0797, 1960, 0154, 0236, 0463, 0180, 0178, 0171, 1963, 1944, 0623, 0282, 0280, 0270, 0185, 0183, 0182, 0181, 0179, 0177, 0158, 0039, 0038, 0019Hitachi –1145, 0145, 0016, 0032, 0038, 0056, 0095
HP TV Remote Codes
1088, 1089, 1101, 1494, 1502
iLo TV Remote Codes
1286, 1603, 1990
JVC TV Remote Codes
0053, 0036, 0069, 0160, 0169, 0182, 0731, 1253
LG TV Remote Codes
1256, 0178, 0442, 0700, 0829, 0856, 1178, 1325, 1423, 1758, 1993
Magnavox TV Remote Codes
1454, 0054, 0030, 0706, 1963, 1944, 1525, 1254, 1198, 0802, 0386, 0230, 0187, 0186, 0179, 0096, 0036, 0028, 0024, 0020
Mitsubishi TV Remote Codes
0093, 1250, 0150, 0178, 0014, 0019, 0098, 0155, 0331, 0358, 0836, 0868, 1550
Optimus TV Remote Codes
0154, 0250, 0166, 0650
Panasonic TV Remote Codes
0250, 0051, 0055, 0162, 0226, 0338, 0375, 0650, 1291, 1410, 1941, 1946, 1947
Phillips TV Remote Codes
1454, 0054, 0690, 1154, 1483
Polaroid TV Remote Codes
0765, 0865, 1262, 1276, 1314, 1316, 1326, 1327, 1328, 1341, 1498, 1523, 1991, 1992
Also get: Remote Control Codes For Atvio TVs
RCA TV Remote Codes
1447, 0047, 2002, 1958, 1953, 1948, 1547,1347, 1247, 1147, 1047, 0747, 0679, 0278, 0174, 0135, 0090, 0038, 0029, 0019, 0018
Samsung TV Remote Codes
0060, 0812, 0702, 0178, 0030, 1903, 1575, 1395, 1312, 1060, 0814, 0766, 0427, 0408, 0329, 0056, 0032, 0019
Sanyo TV Remote Codes
0154, 0088, 0107, 0146, 0159, 0232, 0484, 0799, 0893, 1142
Sceptre TV Remote Codes
0878, 1217, 1360, 1599
Sharp TV Remote Codes
0093, 0039, 0153, 0157, 0165, 0220, 0281, 0386, 0398, 0491, 0688, 0689, 0818, 0851, 1602
Sony TV Remote Codes
1100, 0000, 0011, 0080, 0111, 0273, 0353, 0810, 0834, 1317
Sylvania TV Remote Codes
0054, 0030, 0171, 0020, 0028, 0065, 0096, 0381, 1271, 1944, 1963
Toshiba TV Remote Codes
0154, 1256, 0156, 1265, 0060, 1945, 1935, 1704, 1656, 1635, 1356, 1343, 1325, 1306, 1156, 0845, 0832, 0650, 0149, 0036
Vizio TV Remote Codes
0864, 0885, 1499, 1756, 1758
Zenith TV Remote Codes
0017, 0463, 1265, 0178, 0092, 0016
Full list of ADB TV remote codes 1
Click image for full size!
Full list of ADB TV remote codes 2
Click image for full size!
You turn your TV on and off using your STB and TV. You should not use the DVD right now.
AV switches the inputs on your TV (video 1, video 2, etc.).
Only programmers should use SHIFT and SETUP.
When you press the POWER button, the selected component of your home entertainment system will turn on or off.
Select channels directly with the NUMBER KEY PAD (0-9).
TV sound will be turned off using the MUTE button.
Currently, our system does not support the TV.
Our system currently does not support the VIRTUAL KEYBOARD.
Closed captioning can be turned on and off with CC. There is, however, some variation depending on the television, channel, and programming. TXT may also be labeled on some remotes.
To increase (or decrease) the volume, use VOL+ (or VOL-).
The next highest (or lowest) channel is selected with PROG + or –. Using these buttons will allow you to navigate up and down the channel list.
The program guide can be viewed by using GUIDE. The button may be labelled ACTION on some remote controls.
You can display the settings menu by pressing the orange MENU button once.
Information about current channels and programs can be displayed using INFO.
Press a second time to see more channel detail and the next program.
Use ARROW KEYS (right, left, up and down) to move the cursor in the program guide and menu screens.
Once you have entered channel numbers, click OK. If the channel number is entered but the enter button isn’t pressed, some TVs will change.
Additionally, you can use the OK key to select options from the program guide and to tune a program.
The BACK button allows you to go one screen back in the main menu and to recall the last channel. The BACK button lets you alternate between the last two channels viewed by pushing it repeatedly.
The EXIT button can be used in the menu and guide, or whenever you wish to exit a particular function.
Our system does not currently use the RED, GREEN, YELLOW & BLUE buttons.
The PVR (Personal Video Recorder) has the following buttons to control its functions: REWIND, PLAY, PAUSE, FAST FORWARD, and STOP.
It is advisable not to press the TV remote as it may change its settings.
