SONY Soundbar Remote Control Codes

SONY Soundbar Remote Control Codes

The codes needed for controlling SONY Sound Bars with a universal remote are available on our site. If you have the right programming guide and the right remote codes for the sound bar, you can control your SONY soundbar with any universal remote. We will find you the correct remote code if the codes below do not work with your SONY sound bar. All you need to do is leave a comment below with the model number of your remote control.

Also read: Denon Soundbar Remote Control Codes

SONY Sound Bar Remote Control Codes

It is necessary to program the remote control to be used with the SOUNDBAR to use the remote codes below. See below for details on how to program your remote to work with your SOUNDBAR.

Activate the SONY Sound Bar on your universal remote control. The following codes should be entered.

SONY Sound Bar 4 Digit Remote Control Codes:


SONY Sound Bar 5 Digit Remote Control Codes:




All codes reported working with the….

SONY Soundbar HT-CT60, HT-CT260, Sony STR-K700, Sony HTCT260, HTCT660, Sony CT-660, Sony CT770, SA-CT60, HT-CT260H, and HT CT150.

Testing of these codes has been carried out using…

Comcast remote controls, U-verse remote, S10-S4, HR24-500, RC65RX, etc…

Using a Comcast Remote?

Press AUX, Code 31759, and POWER or -> PLAY

Using ATT U-Verse Remote?

-ATT/OK – 955 – ENTER (Will change to volume follows mode button)

-ATT/OK – 955 – AUX – ENTER (Will change to ALWAYS control Sony)

What about power ON and power OFF?

-ATT/OK – 977 – ATT – TV – AUX – ENTER (Will add aux to power sequence)

(Remember there is an ENTER button at the bottom right, not the OK button)


Program – ATT/OK – 955 – ENTER.

The STB sound can be set to 15 in ATT mode.

The volume of the TV should be set at a comfortable level

Soundbar volume should be set to a comfortable level.

To assist with programming your SONY soundbar, program your U-verse remote control using the setup tool.

Find your brand and model of Universal remote control by clicking on the links below. If your remote does not have programming instructions, you can find a YouTube video on your model number or the packaging of the remote.

Using the remote codes provided on this page, you may program your SONY SOUNDBAR remote following the step-by-step instructions.

The following remotes can be programmed: COX remotes, ONE FOR ALL remotes, DIRECTV remotes, CHUNGHOP remotes, JUMBO remotes, GT MATRIX remotes, Zenith remotes, Vizio remotes, RCA remotes, Comcast remotes, DISH remotes, Samsung remotes, Mitsubishi remotes, SONY remotes, Philips remotes, On-Q home systems remotes, GE remotes, and the UR5U-

There are several pages containing the most common Universal Remote codes for TV: two digit TV remote codes, three digit TV remote codes, four digit TV remote codes, and five digit TV remote codes.

Use the comment form below to tell us and all our readers which remote code worked for which device if you have found a remote code that works with Sony Soundbars. We appreciate your help!

Want more help setting up your SONY sound bar remote? Feel free to ask below.

Related: Remote Control Codes For Soundbars

Leave a Reply

Your email address will not be published. Required fields are marked *