Vizio Soundbar Remote Control Codes

Vizio Soundbar Remote Control Codes

Are you looking for Vizio Sound Bar remote codes? We have the codes needed if you are using a universal remote control, cable remote or satellite remote control to control your Vizio Sound Bar. It’s possible to operate a Vizio sound bar with a universal remote if you have the right instruction guide and the correct remote codes for the sound bar. If the codes below don’t work on your SB, please leave a comment below and let us know which remote code or programming method is correct.

VIZIO Sound Bar Remote Codes

The VIZIO Sound Bar can be controlled by your universal remote control…

It is required that you program your remote for use with the codes below when using them. Below you will find information on how to program your remote control to work with your sound bar. You will need the following 4 and 5 digit remote codes.

Also read: Remote Control Codes For Daewoo TVs

Vizio Sound Bar 4 Digit Remote Control Codes:

1517

0660

0883

Vizio Sound Bar 5 Digit Remote Control Codes:

31517

32454

31975

11144

It is possible to program some sound bars to accept other IR controls. Plug the IR control from the TV into the Vizio SB.

There are no reported issues with Vizio Soundbars VSB200, SB3820, VSB201, VHT215, or S3821.

Comcast remotes, Verizon Fios, Xfinity X5 remotes, Uverse, U-Verse, Atlas S10-S3, S10-S4, etc. have been tested with these codes.

You can fix this problem if you have Verizon Fios.

You can use the Key Fix feature if the VOL, Mute, or A/V keys on your remote control do not function correctly. The steps are as follows:

1 – While holding the OK button, press and hold the * button simultaneously. When the Red LED blinks twice, it illuminates for a few seconds.

2 – If you cannot use the key, press and hold it. Every time you release, the remote will try again.

3 – Upon receiving a correct response, release the key.

4 – The current setting will be saved once you click OK.

The remote codes for cable TV remotes and satellite TV remotes may not work with certain configurations. A device that is not supported can still be programmed by setting each key individually to send a code (such as a sound bar). To operate your remote, you will need to program each button or key. Sound bar functions are controlled by codes sent from the remote. It is possible to accomplish this by setting AUX to a main device code and then separately adjusting volume up and down.

An example would be…

The code 00169 will increase the volume.

The code 00168 will decrease the volume.

Mute can be toggled with code 00037.

Power is turned on and off by the code 00165.

There’s a way for Comcast users to get the remote to work with the SB if they use it.

1 – 20752 can be assigned to the AUX button to test if the signals are working.

2 – When Vol DOWN is pressed, the volume should be lowered, and when it is pressed, it should be boosted.

3 – With the 994 command, the signals can be permanently assigned to Vol UP and Vol DOWN.

Here is a Vizio remote control fix for the Uverse sound bar…

1 – Code 1009 on the Uverse remote will allow you to program the Vizio soundbar to function as the “TV” button.

2 – The DVD key on your remote can be programmed manually or using the auto scan mode on your TV.

3 – By pressing the TV button, sending volume to ATT, and pressing OK, entering 955, and pressing TV.

4 – You can turn off all devices at the same time by pressing ATT and OK buttons, releasing them, entering 977, pressing ATT again, then pressing the DVD and TV buttons, followed by the ENTER key. Pressing volume will operate the sound bar, then pressing power will turn everything off or on.

Here are the links for programming a Universal or TV remote control: Find your remote control’s brand and model from the links below. Alternatively, you can check the instructions for programming your remote that comes with your remote or watch a YouTube video for your specific model number on the internet.

Follow the instructions on this page to program the remote for your Vizio Soundbar once you have found the step-by-step instructions.

Remote controls which include satellite, cable, and TV remotes, including the COX remote, the ONE FOR ALL remote, the DIRECTV remote, the CHUNGHOP remote, the JUMBO remote, the GT MATRIX remote, the Zenith remote, the Vizio remote, the RCA remote, the Comcast remote, the DISH remote, the Samsung remote, the Mitsubishi remote, the Sony remote, the Philips remote, the On-Q Home Systems remote, the GE remote, and the UR

IF YOU HAVE FOUND A remote code for your Vizio Soundbar that works, we would appreciate it if you could comment below and share the remote code with all our readers. We appreciate your help!

Are you having trouble programming your VIZIO soundbar to your Universal or CAB SAT remotes? Send us your questions below, and we will assist you as soon as possible.

Related: Remote Control Codes For Philips TVs

Leave a Reply

Your email address will not be published.