VIZIO Universal Remote Setup codes for RCA TV (including LCD, LED and Plasma)

Following are the steps for programming your VIZIO Universal Remote Control to work with RCA TVs (including LCD, LED and Plasma).

Also read: RCA universal remote control programming instructions

1. Make sure your TV (or other device you want to control) is turned on manually.
2. The LED will flash twice when the button on the TV (or device) is held down for 5 seconds. The LED remains lit.
3. From the following list, select one of the following programming codes for your RCA TV (including LCD, LED, and Plasma): 0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188. Please enter the numbers as indicated. A flash occurs after each digit is entered. After the last digit is entered, the LED flashes twice and then turns off if the code is accepted. 
4. By pressing the POWER button on the VIZIO remote, you will turn on the device. It will turn off if it does not. Try again with another code if necessary.

Brand: RCA.

Device Type: TV (including LCD, LED and Plasma) .

Here is a list of remote codes: 0031 0004 0048 0054 0094 0100 0102 0107 0129 0191 0005 0009 0000 0162 0163 0342 0003 0015 0022 0096 0113 0125 0179 0187 0188

See also, GE UltraPro 6 Device Universal Remote codes with Program Instructions